Breaker Steels

CODE DESCRIPTION DIAGRAM
1 MOIL POINT - 380/450mm under collar
Drop Forged of high grade steel, this Hammer Iron with heat treated work
areas is used for demolition work and starting holes in the centre of a
concrete slab. The most common of the demolition steels used for general
breaking where there is not a requirement to control the line of fracture
 
2 NARROW CHISEL - 380/450mm under collar
Narrow Chisel used in a similar way to the moil point but the line of fracture
is controlled along the line of the chisel end. Used on applications where it is
important to have a clean edge retained on the workpiece to be broken
 
3 75mm WIDE CHISEL - 380mm under collar
Wide Chisel used generally where softer material is to be cut or broken again
used on applications where the line of fracture needs to be controlled
 
4 115mm WIDE TARMAC CUTTER
Tarmac Cutter used for cutting of Coated stone the wedge shape of the side
profile is preferred by many operators as it facilitates easy removal of the
blade after each cut
 
5 CLAYSPADE
Clayspade is a purpose designed blade for cutting / digging of bolder clay.
The clay spade geometry facilitates the cutting action to return to an open
face. If the cutting edge is damaged by stone contamination in the burden
to be cut it will damage the cutting edge and destroy the natural scooping
action. This tool is favoured by tunnelling contractors and companies
specialising in under pinning in clay conditions. Also excellent for general
garden and landscaping
 
6 STEM - use with 180mm Dia Tamping Pad
These tools need to be used together the stem can have a number of shank
configurations to suit both Pneumatic and Electric powered breakers.
The pad is selected to suit the type of compaction operation required whether
this be for back filling following emergency repairs to services or compaction
of mould in industrial applications
 
7 DIA TAMPING PAD - 180mm
Floor cleaning tool
 
8 WIDE ASPHALT CUTTER
Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit
of a thinner parallel side profile and radius on the blade allowing faster
penetration in the cutting action. Suitable for lighter weight and less
powerful breakers
 
9 MOIL POINT 330mm under collar
The most common of the demolition steels used for general breaking where
there is not a requirement to control the line of fracture
 
10 NARROW CHISEL 330mm under collar
Narrow Chisel used in a similar way to the moil point but the line of fracture
is controlled along the line of the chisel end. Used on applications where it is
important to have a clean edge retained on the burden to be broken
 
11 STEM - FLOOR CLEANING TOOLS AND PADS
Stem for floor cleaning tool is available with different shank types and
facilitates the use of the smaller electric tamping pads and especially
the floor cleaning tool
 
12 FLOOR CLEANING TOOL
Floor Cleaning Tool used in conjunction with a shank to suite the type of
breaker to be used. The floor cleaning tool has a flexible replacement blade
held in place by retaining bolts and can be used for the removal of lino tiles
or debris spilt on to concrete floors prior to finishing